GRATINGS FAQ | From Officine Locatiu 1295, frequently asked questions.

Gratings, since 1925!


GRATINGS FAQ

GRATINGS: FREQUENTLY ASKED QUESTIONS.

CUT TO SIZE: Each single grating bar is cut to the required measure: minimum cm. 50, maximum mt. 10; for concave and embossed types cut is on the holes. Height (mm. 48) and width (mm. 250) cannot be changed. Lenght tolerance +/- mm. 3.

FIXING CLAMPS: If necessary, fixing clamps may be placed on the surface as shown below (approx one fixing clamp per square meter). Bars weight and closed outer edge give usually enough stability to avoid use of clamps.

TRANSPALLET: Doga Locati safety grating is suitable for walking surfaces: this means that only hand-trolleys with appropriate load are allowed. If necessary, for light transpallets we suggest  to lay on the surface corrugatet sheet-iron for a proper weight distribution.

SHIPPING: Packages are loaded by bridge crane on open-top trucks or containers; standard package dimensions: 40 bars, width cm. 55 x bars length x cm. 100 heigth.